I used some Oxpho blue to colour the parts. I got a poor result for some reason. Hey, it's a prototype...I'll figure that out later.
That's a 1/16" ball on top of the tiny spring inside one half.
Screwed together.
Mounted on the sight. Tightened up the disk is on the wrong side.
Also I didn't make the boss long enough and the body fouled against the sight body.
So I made a short spacer to time the threads and place the disc on the right side.
Tiny hole.
Large hole. 8 different holes selectable by rotating the disk.
You can see I put a coarser knurl on the disk.
0 comments:
Post a Comment