Monday, November 8, 2010

Crosman Model 99 Rifle Disassembly, Part 2

Apologies in advance for dwelling a bit on the screws, but as always the primary reason for the blog is so I remember how the darn things go back together.

10291001

Sideplate screws removed from the right side.

10291002

One screw.

10291003

Another screw.

10291004

And another.

10291005

Yet another.

10291006

Last one. Notice how they are all, with the exception of two, completely different.

10291007

I removed the side and the only thing that jumped out was the magazine follower and spring.

10291008

Another pic.

10291009

Follower and spring.

10291010

Powerlet piercing screw assembly.

10291011

Hammer and trigger and springs…

10291012

I lifted out the trigger and trigger spring.

10291013

Then lifted out the hammer and hammer spring.

10291014

The hammer spring wraps around both sides of the hammer.

10291015

Stock screw nut.

10291017

The valve assembly just lifted out.

10291018

The lever and hammer assembly.

10291019

Lifted straight out.

10291020

Two steel ears on the hammer, which is probably a good thing rather than a more complex potmetal casting.

10291021

Hammer assembly.

10291022

The middle part is just a little complex.

10291023

The broken part of what I’m assuming is identical to the cam ring on the model 600 pistol.

10291024

This was a bit if a puzzle, but the parts are held together by a screw thread extending out of the rod.

10291025

All the parts…more to come…

0 comments:

Post a Comment