Sunday, October 20, 2013

Diana Model 16 Disassembly, Part 1

Well I finally found an airgun at a yard sale. In the past couple of years I haven’t seen anything but the most common Crosman and Daisy airguns for sale. Finding something Derrick and I haven’t already torn down is harder still! So I was happy to find a Diana Model 16 “rifle” (it’s a smoothbore) at a yard sale yesterday. I have always wanted one because of the odd hinge system for the break barrel. It is definitely sized for a small child. This one is postwar as it’s made in Great Britain rather than Germany.
10201301
That’s a 2’ ruler.10201302
DIANA      MOD. 16      MADE IN GREAT BRITAIN10201303
10201304
Most of the screws use the cool looking, yet annoying to remove, slotted nut.
10201305
That’s a front sight!
10201306
This is the unique hinge. Notice that the barrel locking detent is in the cocking arm, not the receiver or barrel.
10201307
You can see the piston sear.
10201308
There is a bit of rust…The breech washer is carried by the receiver rather than the barrel assembly.
1020130910201310
Removing the trigger guard. I don’t like that it relies on a wood screw, as this does need disassembly from time to time. That said, the screw hole was not stripped.
1020131110201312
I used snap ring pliers to engage the slotted nut while I removed the cross bolt/trigger pivot. See my spiffy new Panavise? It came in handy.
10201313
Front screws have a lock washer…it doesn’t want to come out of the wood.
10201314
Action removed.
1020131510201316
The spring rests in an angled pocket in the stock.
10201317
The only real damage to the stock was a small chip in the butt.
10201318
The trigger.
1020131910201320
Removing the cocking arm pivot bolt.
10201321
Punched out the retaining pin. There is no preload on the spring.
10201322
The pin.
10201323
Had to tap the end cap off, it’s a friction fit.
10201324
Not particularly exciting.
10201325
The spring & piston wouldn’t come out.
10201326
Problem #1, the edge of the slot is folded down past the end of the spring guide. Not sure if this is intentional.
10201327
What’s up with all of that lint?
10201328
The spring guide also has a twist detent…
1020132910201330
Now it comes out…I had to rotate/pry it with a stout pick.
More to come…

0 comments:

Post a Comment