I met him at a local gun show and brought it home. The metal work and wood are in exceptional shape for their age. I'm inspired now to do some clean up on my 55's stock.
This is from around 1955? Are you kidding me? It's really a beautiful gun.
A light weight barrel sleeve was present--but no threaded collar at the muzzle. This one is retained by the front sight and a set screw (missing) just in front of the breech block.
The checkering is still sharp. Feels like it was cut last week.
There's a crack at the front of the left side forend. Can't see it in this pic.
Started by removing the front sight.
And the sleeve slid right off. The set screw threads are damaged in the sleeve. I think they were M6 x 1.0 mm. I'll have to tap it to a slightly larger size.
Removed the diopter sight next.
I looked in my parts box and found a suitable rubber eye cup for the aperture.
Pretty sure this is period correct.
The front trigger guard screw came out next... (There's no need to remove the rear screw--it anchors the trigger guard to the stock.)
Followed by the forend stock screws.
The action lifts out of the stock.
Unscrewed the knurled end cap. There's a spacer underneath that puts pressure on the trigger assembly and hold it in location.
Looked at the anti-beartrap...
and lifted the cocking lever out of the piston. There's no cocking shoe on this gun.
With the cocking lever out of the way, the anti-beartrap plate is pivoted to the side...
and removed. Note the correct orientation.
Put the action in the medieval spring compressor. Needed a dowel to reach into the compression tube to bear against the guide.
A 9mm wrench unscrews the retaining bolt.
The block. It has a slot in the side for the anti-beartrap plate to pass through.
So, the retaining bolt threads into the spring guide. Interesting.
At least I thought it was interesting just how short the guide is. Most spring guns today have a guide three times as long.
More to come.
0 comments:
Post a Comment