I've been working on airguns here and there, but don't have much that I really consider noteworthy--mostly because it's stuff covered previously--or it's just rather mundane. Probably even mundane stuff previously covered. Oh well, gotta go with what you've got.
Number ONE
7/8" HSS double-ended ball mill. Need it for one of those "future" projects. Bought it a few weeks ago because it was the right price for what will likely be one-time use. Problem? I don't have a machine capable of using it unless it's single-ended. About an hour (and three cut-off wheels) later, I cut through it without somehow hurting myself. What a super deal.
Number DOS
Looked at some guns online again (this passes for research) and finally settled on what I want grip-wise for the old Crosman 150. As I've been meaning to make grips for this gun for four or five months, this is a positive step forward.
It's a Bolivian rosewood.
Number Thrice
Didn't like the glossy black Crosman grips on this one. But I wanted black grips. Those guys on the Crosman Forum are right. Truck bed liner, TBL as they call it, feels great.
Two coats and the grit in the finish feels much better than stock.
Number Four
Didn't care for the bolt handle on a beater Crosman 2040. Knurled a scrap of 0.250" diameter drill rod.
Turned down here and there for breech slot clearance.
Cut the #8-32 threads.
All blued up and installed. The sharp-eyed will notice that this is not the same gun pictured 5 or 6 images above. I sprayed these grips with TBL, too.
450 airgun posts! Thanks again to all our readers.
More good stuff in a few days.
0 comments:
Post a Comment