On I go…
A small setscrew, there are only two socket head fasteners on the rifle.
Removed and the barrel slides out of the block. The magazine tube is pressed or soldered in as far as I can tell.
The shuttle.
Slides right out.
The lower bar keeps the bbs from falling into the valve, the upper has something to do with the cardboard tube of bb-s that is fed into the gun. Haven’t figured that out yet.
A screw retains the feed ramp.
Removed.
A screw retains that spring.
Removed.
The leaf spring that allows the feed ramp to spring up.
Removed.
Two springs on the trigger mechanism.
One removed.
I left the other one in place, for now at least.
Large head screw.
Removed and the feed cam comes off.
I don’t know what to call these parts yet, and I’m leaving them in place.
The hammer & valve assembly is exposed.
More to come…
0 comments:
Post a Comment